Gradall Forklift Part

Gradall Forklift Parts - Through the period when WWII created a scarcity of workers, the well-known Gradall excavator was born in the 1940s as the idea of two brothers Ray and Koop Ferwerda. The brothers faced the problems of a depleted workforce because of the war. As partners in their Cleveland, Ohio construction company called Ferwerda-Werba-Ferwerda they lacked the available laborers so as to perform the delicate work of grading and finishing on their freeway projects. The Ferwerda brothers decided to make a machine which would save their company by making the slope grading work more efficient, less manual and easier.

The very first excavator prototype consisted of a device with two industrial beams on a rotating platform fixed to a second-hand truck. There was a telescopic cylinder that was used to move the beams back and forth. This enabled the fixed blade at the far end of the beams to push or pull the dirt. Before long enhancing the initial design, the brothers built a triangular boom in order to add more strength. Moreover, they added a tilt cylinder which let the boom turn 45 degrees in either direction. A cylinder was positioned at the back of the boom, powering a long push rod to enable the equipment to be equipped with either a blade or a bucket attachment.

1992 marked a momentous year for Gradall with their launch of XL Series hydraulics, the most dramatic change in the company's excavators since their creation. These top-of-the-line hydraulics systems allowed Gradall excavators to deliver high productivity and comparable power on a realistic level to conventional excavators. The XL Series put an end to the original Gradall equipment power drawn from gear pumps and low pressure hydraulics. These traditional systems efficiently handled finishing work and grading but had a hard time competing for high productivity work.

The new XL Series Gradall excavators proved a remarkable increase in their lifting and digging ability. These versions were made together with a piston pump, high-pressure hydraulics system which showed huge improvements in boom and bucket breakout forces. The XL Series hydraulics system was even developed with a load-sensing capability. Conventional excavators make use of an operator in order to choose a working-mode; where the Gradall system could automatically adjust the hydraulic power intended for the task at hand. This makes the operator's whole task easier and even conserves fuel at the same time.

As soon as their XL Series hydraulics became available, Gradall was essentially thrust into the highly competitive market of equipment meant to tackle demolition, pavement removal, excavating as well as different industrial work. Marketability was further enhanced with their telescoping boom due to its exclusive ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Carriage Rollers

Carriage Rollers - Specially designed bearings called carriage rollers are often found on lift masts since they enable them to work better in tough environmental conditions. The conventional lift mast is often subject to frequent oscillations, shocks, vibrations and high dynamic and static loads. This apparatus is often exposed to environmental influences like for example heat, dust, cold, aggressive ambient...

More

---

Komatsu Forklift Attachment

Komatsu Forklift Attachments - Komatsu Forklift U.S.A. Inc. has an excellent reputation for building dependable and durable lift trucks. Komatsu is recognized around the globe as a corporation with a rich heritage while retaining an exceptional benchmark of refinement and quality in both design and equipment production. Komatsu Forklift U.S.A., Inc., a branch of Komatsu Forklift Co., Ltd., International Division...

More

---

Forklift Seat Belt

Forklift Seat Belts - Explained in the Regulation guidelines are the use of seatbelts and operator restraints on forklifts. It states that the liability falls on the employers' to make sure that every machine, piece of equipment and device is used rightly used in accordance to the directions of the maker. Rough Terrain lift trucks must meet the regulations of...

More

---

Propane Forklift Attachment

Propane Forklift Attachments - One of the more versatile units of forklift are the propane model which can be more beneficial as opposed to different models. They can normally operate in numerous different environments both outside and indoors. They do not emit harmful gases similar to fuel powered forklifts. In addition, propane forklifts are unlike the electrically powered type which...

More

---

Attachment for Reach Trucks

Reach Truck Attachments - Reach trucks are loading devices used by varieties of establishments that maintain a stockroom facility or circulation center relating to the organization of completed merchandise and materials on pallets which are inserted into elevated shelving units. This device provides straightforward and safe retrieval of the loaded pallets whilst ensuring efficient storage of goods that are not...

More

---

Used Parts for Forklifts

Used Forklift Parts - Inevitably, lift truck parts would eventually wear out and need replacing. The choice of obtaining brand new parts could become costly so another idea is to buy used parts. This can save a lot of money in the long run. It is a great idea to obtain used forklift parts which have been reproduced. These components...

More

---

Cushion Tire Forklift Part

Cushion Tire Forklift Parts - Cushion tires are a solid tire with a smooth profile. Its' tread is bonded to a steel ring so as to shape the tire, and the tire is pressed onto a hub that is affixed to the forklift. These tires are suited for use in smooth floor warehouses and are obtainable in different polyurethane or...

More

---

Clamp Forklift Attachments

Clamp Forklift Attachments - When using lift trucks on the job location can help lessen the physical workload of the staff making the area a lot safer. In a factory or business, worker safety is important. Supplies should be moved, stored and lifted on site without causing any injury or harm to the staff. Lift trucks are usually used in...

More

---